Specifications for External Power Supply Control Function

(1) Power ON Control

Power ON control supports following 3 types.

  • Power ON by power activation
  • Power ON by power switch
    • Power ON by power activation and that by power switch can be mode switched by DIP switch or other methods.
    • In addition, it is recommended to support the power ON control by power ON control signal on the expansion bus.
    • The power ON by power ON control signal on the extended bus shall be controlled by inputting the power ON control signal from the Expansion board with WakeOnLAN function.

(2) Power OFF Control

  • Power OFF by power switch (controlled by software)
  • Power OFF by other control commands (controlled by software)

  • Comments